  
							
							  | 
                           
                          
                            
                                
                                  | 
									 
									
									edo competition has created 
									the Gallardo LP600-4, improving the 
									Lamborghini sports car's performance by 
									increasing power output to 600 horsepower 
									and peak torque to 572 Nm as well as changes 
									to the suspension and new wheels and exhaust 
									system.  | 
                                 
                                
                                  | 
									 
									
									   | 
                                 
                                
                                    
									  | 
                                 
                              | 
                           
                          | 
                       
                     
					  
						600 – 340 – 
						3.5. These are the three most prominent figures of the 
						new edo competition Lamborghini Gallardo LP600-4 
						project. 600 stands for its power 
						output, 340 for its top speed and 3.5 seconds is how 
						long it takes to accelerate to 100 km/h (62 mph) from a 
						dead stop. 
					
					
					edo competition has managed to improve performance by 
					increasing power output to 600 horsepower at 7,970 rpm and 
					the torque output to 572 Nm (422 ft-lb) at 6,845 rpm. 
					
					Another priority 
					was to upgrade the suspension in order to improve 
					drivability, driving dynamics and precision. edo competition 
					achieved this by employing a newly developed sport 
					suspension system, which is adjustable in compression and 
					rebound damping. This technology allows for custom 
					suspension setups that are ideally matched to a wide range 
					of needs. The low friction shock absorbers and new spring 
					rates were tested extensively on race tracks and high speed 
					ovals, as well as on the road. 
					
					Rounding off the 
					sporty concept are 19 inch three-piece racing wheels with 
					artificially-aged cast center-sections, hand-polished outer 
					rims and 39 stainless steel screws. For the front axle the 
					customer can specify stock tyre dimensions or 235/35 ZR 19, 
					while the rear wheels are shod with 305/30 ZR 19 Dunlop 
					Sport Maxx rubber. With this solution edo competition 
					enables its customers to reuse the factory tyres on their 
					new wheels. 
					
					
					The new stainless steel high-performance exhaust system with 
					butterfly valves is an attractive proposition. Not only is 
					the sound level adjustable via remote, the exhaust also 
					frees up 15 horsepower and lets the driver enjoy a whole new 
					aural experience. As a welcome side effect, the edo exhaust 
					system weighs 12 kg (26 lb) less than the original piece.  
					
					
					As a result of years of experience with high speed tests, 
					edo competition has reinforced the front end of the edo 
					LP600/4 with a new front spoiler lip, making 340 km/h (211 
					mph) runs into a relaxing affair. All modifications are 
					carried out exclusively at edo competition Motorsport GmbH 
					in Ahlen. 
   |