More
dynamic, lighter and powerful – Lamborghini will launch the
Gallardo LP 570-4 Superleggera at the Geneva Motor Show
tomorrow which will become the new top model in the Gallardo
line-up. Its "superlight" badge refers to a driving machine
of true sporting character and describes a high-performance
and lean automotive athlete. The Superleggera makes its
entrance to continue the success of its predecessor,
launched in 2007, of which Lamborghini produced and sold no
less than 618 in just one year.
Compared with the Gallardo LP 560-4, the weight of the
Gallardo Superleggera has been trimmed by 70 kilograms (154
lb). The super sportscar from Sant’Agata Bolognese boasts a
dry weight of no more than 1340 kilograms (2954 lb) – the
lightest road-going model in Lamborghini’s range, and a new
arrival in one of the most exclusive market niche segments.
One
key factor is the exterior and interior components made from
carbon-fiber. Carbon-fiber is ideal for the manufacture of
sportscars as its use allows for weight reduction and
improved mechanical features. The car’s performance is thus
enhanced thanks to a better weight-to-power ratio and
reduced total mass, which means that CO2 emissions are also
lower. Lamborghini has been at the forefront in this
material’s application for many years, and now the brand is
extending its leadership even further.
The
V10 power unit with 5.2 liters (317,6 cu in) of displacement
generates 419 kW (570 CV) in the Gallardo Superleggera. This
puts the weight-to-power ratio of the new top model at only
2.35 kilograms (5.18 lb) per CV and guarantees breathtaking
performance. The Gallardo LP 570-4 Superleggera handles the
dash from zero to 100 km/h (0-62 mph) in 3.4 seconds and
flies past the 200 km/h (124 mph) mark only 10.2 seconds
later, ultimately reaching 325 km/h (202 mph). The engine
with "Iniezione Diretta Stratificata" gasoline direct
injection also boasts an impressive degree of efficiency.
Its fuel consumption and CO2 emissions have been reduced by
20,5 percent compared to the previous model.
The
Gallardo Superleggera is an uncompromising driving machine.
Its running gear, with its mighty braking system, has a
dedicated and exceptionally precise set-up, while its
19-inch wheels, Pirelli P Zero Corsa, clad in Pirelli sports
rubber, are extremely light. The Lamborghini Gallardo LP
570-4 Superleggera brings a whole new meaning to the term
"super sportscar".
Design and aerodynamics
The
elegance of every Lamborghini rests on both its extreme
power and precise functionality. The Gallardo LP 570-4
Superleggera’s bodyshell is sculptured and completely free
from stylistic additions. Dimensions define the contours of
a dynamic wedge – 4.39 meters (172,7 in) long, 1.90 meters
(74,8 in) wide, but only 1.17 meters (45,9 in) high.
Exterior modifications are all directed at increasing
aerodynamic effects. Working closely with wind tunnel
experts, the designers from Lamborghini’s Centro Stile
remodeled the front bumper – three-dimensional, deeply
recessed elements form trapezoidal frames for the large air
intakes. Together with the V-shaped, sharply defined nose
and the LED daytime running lights, the black elements give
the front end a razor-sharp look, reminiscent of
Lamborghini’s top model. The new design increases the supply
of cooling air and improves the downforce on the front axle.
The modifications to the fully-covered underbody, which
include new sill elements and a redesigned diffuser
incorporating four large tailpipes, help to achieve better
aerodynamic results. The Gallardo Superleggera sports a
small rear spoiler as standard. A big rear spoiler is
available as an option.
The
bodyshell
The
model on which the Gallardo LP 570-4 Superleggera is based,
the Gallardo LP 560-4, is already a prime example of
Lamborghini’s lightweight engineering philosophy, with its
dry weight of 1410 kilograms (3108.5 lb). Its bodyshell is
made from aluminum, with moulded node elements and extruded
parts forming an extremely stiff framework into which the
aluminum panels are integrated. The spaceframe structure is
impact-resistant and forms the basis for the super
sportscar’s precise handling. Against this background, the
task of reducing the weight by a further 70 kilograms (154
lb) presented a huge challenge to Lamborghini engineers –
the target figure, a weight-to-power ratio of 2.35 kilograms
(5.18 lb) per CV, sets a new best among the competition.
Lamborghini engineers handled the task as they usually do –
with hi-tech competence and aesthetic flair.
The
rear windshield and side windows are made from robust and
resistant polycarbonate. The engine cover also includes a
polycarbonate window, beneath which the V10 engine is
displayed like a technical work of art. The long cover
section runs from the roof to the rear of the vehicle and is
made from carbon-fiber. Engineers also selected carbon-fiber
for the rear spoiler, sills, diffuser, parts of the
underbody paneling and the fine exterior mirror casings.
With
its minimal weight and extremely high rigidity, carbon-fiber
is the ideal material for a super sportscar. As far back as
the 1980s, Lamborghini was already gathering experience in
this field with the Countach. Today, some parts of the
Murciélago’s structure are made from carbon-fiber. In order
to secure this leading position even further, the brand from
Sant’Agata Bolognese established a center of excellence for
carbon-fiber materials, where specialists are developing
components, working with efficient manufacturing
technologies.
Lamborghini’s carbon-fiber strategy is further proven by its
foundation of the "Automobili Lamborghini Advanced Composite
Structures Laboratory" (ACSL) at the University of
Washington in Seattle, USA. Lamborghini provides support to
the facility and its long-term, co-operative research work
in the fields of aeronautics and astronautics, together with
the composite materials’ application within the automotive
sector. Alongside the University of Washington, aircraft
company Boeing is also among Lamborghini’s partners. The
aircraft manufacturer commands enormous expertise in the
field of composite materials. With the new Type 787
Dreamliner, Boeing has developed the world’s first
commercial aircraft built entirely from carbon-fibre. Thanks
to its superior characteristics, it consumes around 20
percent less fuel than a conventional aeroplane.
The
interior and the use of carbon-fiber
Altogether, carbon-fiber components make up 40 (88 lb) of
the 70 kilograms (154 lb) saved on the Gallardo
Superleggera. In the interior, too, engineers aimed to
reduce weight as much as possible. The center tunnel cover,
the door panels and the surround of the e-gear automated
manual transmission lever are made from carbon-fiber. The
high-end material is also used for the sports seats’ shells.
They make a significant contribution to the overall weight
reduction. Just like the rest of the cockpit, the sports
seats are clad in lightweight Alcantara instead of leather.
At Lamborghini, weight reduction is in no way synonymous
with sacrifice – the Gallardo LP 570-4 Superleggera is still
equipped with air conditioning and electric powered windows
as standard. Lamborghini has built on this strength – the
interior is crafted with passionate attention to the tiniest
detail; high quality materials indulge both visually and
sensually. The interior, including roof and mats, retains
the Lamborghini Gallardo’s black finish. As a contrasting
color for elements such as seat trims and stitching,
customers can choose among green, yellow, orange and two
shades of gray. They match exterior paint finishes in Verde
Ithaca, Giallo Midas, Arancio Borealis, Grigio Telesto, Nero
Noctis and Bianco Monocerus.
The
engine
In the
Gallardo LP 570-4 Superleggera, LP stands for "longitudinale
posteriore" and refers to the orientation of the V10 engine
– which is mounted longitudinally behind the driver, just
like every Lamborghini engine. The number 570 refers to the
maximum power output in CV, which equates to 419 kW and is
available at 8,000 rpm. Equally impressive is the pulling
power – the torque curve peaks at 540 Nm (398,3 ft lbs) at
6,500 rpm. The increase of 7 kW (10 CV) is the result of the
new dedicated engine management strategy.
The
V10 has a displacement of 5204 cm3 and achieves a specific
output of 80.5 kW (109.6 CV) per liter. Special features on
this long-stroke engine with an aluminum crankcase include
dry sump lubrication and a cylinder angle of 90 degrees.
Both solutions lower the center of gravity, thus improving
the handling dynamics. To ensure an ideal combustion chamber
fill, the engine has an adjustable intake manifold and
continuous control of the chain-driven camshafts. The
crankshaft is conceived as a dual-plane crank – the
connecting rods of opposing pistons share one bearing. This
configuration delivers alternating ignition intervals of 54
and 90 degrees; a unique sequence that is the reason for the
compelling, racing car-like sound of the V10. As the revs
rise, resounding bass notes are overlaid with razor sharp
harmonics.